Đang chuẩn bị liên kết để tải về tài liệu:
báo cáo hóa học:" High loading of nanostructured ceramics in polymer composite thick films by aerosol deposition"

Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành hóa học dành cho các bạn yêu hóa học tham khảo đề tài: High loading of nanostructured ceramics in polymer composite thick films by aerosol deposition | Nanoscale Research Letters SpringerOpen0 This Provisional PDF corresponds to the article as it appeared upon acceptance. Fully formatted PDF and full text HTML versions will be made available soon. High loading of nanostructured ceramics in polymer composite thick films by aerosol deposition Nanoscale Research Letters 2012 7 92 doi 10.1186 1556-276X-7-92 Hyung-Jun Kim hyungjun@kw.ac.kr Song-Min Nam smnam@kw.ac.kr ISSN 1556-276X Article type Nano Express Submission date 26 July 2011 Acceptance date 27 January 2012 Publication date 27 January 2012 Article URL http www.nanoscalereslett.com content 7 1 92 This peer-reviewed article was published immediately upon acceptance. It can be downloaded printed and distributed freely for any purposes see copyright notice below . Articles in Nanoscale Research Letters are listed in PubMed and archived at PubMed Central. For information about publishing your research in Nanoscale Research Letters go to http www.nanoscalereslett.com authors instructions For information about other SpringerOpen publications go to http www.springeropen.com 2012 Kim and Nam licensee Springer. This is an open access article distributed under the terms of the Creative Commons Attribution License http creativecommons.org licenses by 2.0 which permits unrestricted use distribution and reproduction in any medium provided the original work is properly cited. High loading of nanostructured ceramics in polymer composite thick films by aerosol deposition Hyung-Jun Kim1 and Song-Min Nam 1 department of Electronic Materials Engineering Kwangwoon University 447-1 Wolgye-dong Nowon-gu Seoul 139-701 South Korea Corresponding author smnam@kw.ac.kr Email addresses HJK hyungjun@kw.ac.kr SMN smnam@kw.ac.kr Abstract Low temperature fabrication of Al2O3-polyimide composite substrates was carried out by an aerosol deposition process using a mixture of Al2O3 and polyimide starting powders. The microstructures and dielectric properties of the composite thick films in .